HomeOnline CatalogService BulletinsMSDS'sFAQContact Nylube
Save hundreds or even thousands on high temperature oil problems. Designed for applications where peak usage causes heat and hydraulic breakdowns. Nylube's Tank Cooler is a low cost alternative to expensive, plumbed-in heat exchangers.
2000 BTU/HR. Heat Removal
Exterior Mounted, No Plumbing Necessary
36" W x 14" H x 8" D
Turns on at 120 F
Liquid To Air Cooling
Optional Pump Shut-Down Feature at 160 F (Extra Cost)
Weighs only 20 lbs.
Unit attaches to sidewall of tank reservoir with provided self-sealing rivets. Installation instructions below.
1. Lower oil level in tank by running elevator to top floor, or by draining.
2. Attach unit on flat area of tank horizontally or vertically with the six (6) included self-sealing pop rivets through the 13/16" holes (to be drilled in the tank).
3. Place the pop rivets in the four corners, and the top and bottom center positions.
4. Unit is prewired with a 6 foot line cord and requires a grounded 120 VAC outlet.
5. Machine room ambient temperature is a major factor for tank cooler performance.
6. For increased level of cooling, a second unit may be added if space allows.
For more information contact Nylube @ (248) 852-6500.
2299 Star Court • Rochester Hills, MI 48309 • Tel: 248.852.6500 • Fax: 248.852.6505