MATERIAL SAFETY DATA SHEET


Date of preparation or last revision: July 16, 2009
Manufacturer's name: Nylube Products Company, LLC. phone: (248) 852-6500
2299 Star Court Rochester Hills, Michigan 48309

Product Name: Lubri-Cable


Physical Data

Physical form at 70° F and atmospheric pressure: light brown oil, slight odor
Boiling point: 550° F Freezing point: N/A
Specific gravity: 0.88 g/ml Vapor pressure: N/A
Percent volatile by volume: <1% Evaporation rate: N/A
Solubility in water: negligible


Fire, Explosion and Reactivity Data

Flash point: 310° F Flammability limits: UEL N/A LEL N/A
Decomposition/Combustion products: carbon Extinguishing media: carbon dioxide, foam, water fog,
monoxide,carbon dioxide and other organic dry chemical. Do not use direct stream of water as product
compounds. can float.
Incompatible materials: strong oxidizers Conditions to avoid: heat, open flame, oxidizing materials
Stability at room condition (68° F, 1 atm): stable


Handling and Storage

DOT Category: not hazardous Conditions to avoid: heat, open flame
Precautions in handling and storage: use in well ventilated areas to avoid the accumulation of vapors.
Protective equipment required in handling: ventilation system when vapors can reach high concentrations, protective
gloves when skin contact is likely, eye protection when splashing is likely.
Steps to be taken in case material is released or spilled: for large spills, remove product with vacuum or pump, soak up residue with absorbent material and dispose of properly. For small spills, soak up product with absorbent mat-erial and dispose of properly.
Waste disposal method: consult regulations for local area. Do not pour down drain.


Hazardous Ingredients

Name TLV
PPM mg/m3
None


Health Hazard Data

Effect on eyes: transient irritation Effects on skin: transient irritation, prolonged or repeated
Effects on breathing: pulmonary irritation, dizziness, contact may cause various skin disorders such as dermatitis,
nausea folliculitus and oil acne
Effects of overexposure: persistent irritation


Emergency and First Aid Prodecures

Eye contact: flush with water with eyelid open Skin contact: remove contaminated clothing, wipe excess
Ingestion: do not induce vomiting; seek medical aid if oil off, wash skin well with soap and water.
large quantities are taken. Inhalation: remove to fresh air, provide oxygen, seek
medical aid if breathing does not improve or stops.